If your Carrier/Country is not listed feel free to ask for unlock.
Si tu Compañia/Pais no estan en la lista, no dudes en preguntar por el desbloqueo.
T-MOBILE
Does not support Black listed tmobiles. Please check before ordering
This checker is not always accurate as it ONLY reports LOST/STOLEN. It does not report Blocked for EIP (Non Payment). These are not unlockable either.
Country: USA
Delivery: 5-15 Business Days {Average} *NOTE* DOES NOT INCLUDE WEEKENDS/HOLIDAYS AS DAYS
Manufacture: Apple
Model: 4, 4S, 5, 5C, 5s
Network: T-Mobile
AT&T - iPhone 3 3GS 4 4S 5 [5-15 DAYS] 80%
Active: No (Phone can not be Active on an Account)
Activated: Yes
Blacklist: No
Country: USA
Delivery: 5-15 Days {Average}
Manufacture: Apple
Model: 3G, 3GS, 4, 4S, 5
Network: AT&T
Not Supported: 5C, 5S
Notes: If IMEI is Not Found the Credits can not be refunded to PayPal, only to the users' account.
Many IMEI fail due to Active on Account or device not paid in full, we are not able to check this prior to submission.
Does NOT Support: Verizon/Sprint/T-Mobile Locked phones or 9900xxxxxxxx IMEI.
If phone is blacklisted it will not work on USA GSM
If phone is found not an ATT Iphone there will be delays in returning status
AT&T - iPhone 3 3G 3GS 4 4S 5 [Premium][5-9 DAYS] 100% Found
This service will unlock the following AT&T iPhones: 3G, 3GS, 4, 4S, 5
DOES NOT SUPPORT 5S or 5C
Processing time: Service speed is 5-9 business days (does not include weekends or holidays).
100% ALL IMEIS UNLOCK!
This will unlock phones that are blacklisted, active on a line or even in contract. Can be used after the service for SLOW 5-15 days fails or right away to avoid wasting time. Please make sure your iphone is from AT&T USA as well. If phone is blacklisted in USA, after unlocked it will work outside of USA ONLY.
AT&T - iPhone 3 3G 3GS 4 4S 5 5S 5C [Premiuim] [12-48 Hours]
SERVICE IS BACK UP. This service currently takes 1-2 Business days. There is also slow/no processing on weekends. This has a 100 percent completion rate.
Iphone Service is Working Daily.Please make sure to check your phone is an ATT IPHONE. Supplier may not be able to refund if its not ATT.
Supports: 2G, 3G, 3GS, 4, 4S, 5, 5C, 5s.
Service supports: Blacklisted, In contract, Lost/stolen, Refurbished. 100% Completion Rate
AT&T 5S, 5C (5-9 DAYS) 100% FOUND
This service will unlock the following AT&T iPhones:5C or 5S
Processing time: Service speed is 5-9 business days (does not include weekends or holidays).
100% ALL IMEIS UNLOCK!
This will unlock phones that are blacklisted, active on a line or even in contract. Can be used after the service for SLOW 5-15 days fails or right away to avoid wasting time.
AT&T iPhone SLOW 5S or 5C [5-15 Days]
This service has a 40 percent completion rate. it does take 5-15 days.
Please do not order if you cant wait. We are not able to cancel order unless its pass 15 Business days. If this service returns as bad history or not found, use theExpress (Premium 12-48 Hours) 99 USD OR SLOW PREMIUM 5-9 Days 88 USD method service which is a lot faster and 100 percent return rate.
Verizon - iPhone 4 4S 5 5S
Blacklist: No
Country: USA
Delivery: 1-5 Days {Average}
Manufacture: Apple
Model: 4 4S 5 5S
Network: Verizon Wireless
Not Supported: Lost/Stolen http://www.verizonwireless.com/b2c/nso/enterDeviceId.do
(Please contact customer service = Bad ESN)
Restrictions: Verizon iPhone WILL NOT work on Networks from USA after unlocked.
Supported: Verizon iPhone WILL work on networks outside of USA after unlocked.
iPhone Checker (Carrier Check + Unlock Status + Activation)
This checker is usually INSTANT. Please make sure phone is activated otherwise checker will not come back with results ( In that case please use the GSX checker as it supports those as some other odd cases)
Delivery: 5-15 Mins
Example Results
IMEI : 012744007694135
Unlock code : IMEI: 012744007694135
Serial: 871220FZE00
MEID: N/A
Model: IPHONE 4 32GB WHITE
ICCID: 89302720403030028749
Activated: true
Factory Unlocked: false
iOS: 6.0.1
First Activation Date: 06/29/11
Last Activation Date: 02/06/14
Warranty: Out Of Warranty (No Coverage)
Warranty Started:
Warranty Ends:
Warranty Remaining Days: 0
Purchase Date: 06/28/11
Purchase Country: Canada
Bluetooth Mac Address: N/A
WiFi Mac Address: 145A05B6DDB7
Initial Activation Policy Description: Canada Rogers Fido Flex.
Applied Activation Policy Description: Canada Rogers.
NextTetherPolicyDetails: Canada Rogers.
Lock Status: Locked
How to Unlock an iPhone?
Please take backup of your iTunes before you start (for safety reasons of losing data)
NOTE: USING AT&T SIM CARD TO DO RESTORE WORKS BEST FOR THIS PROCESS!
ALSO: Make sure you are using the most UPDATED version of Itunes 11.05 or whatever is current version.
Make sure you update your iphone software to 6.14 or newest software available during restore.
1. Please make sure that you are running the latest version of iTunes software on your computer. You can check it at
http://www.apple.com/itunes/download
The next 2 steps are optional to unlock your iPhone, but these 2 steps will make sure that your iPhone is running the latest operating system software. If you do not have the original carrier SIM card or do not wish to update your firmware, please go to step 4.
2. If you've the SIM card from your original network (the network your iPhone is currently locked to), insert it. Connect your iPhone to your computer using the Dock Connector to USB cable provided with your iPhone.
3. Update your iPhone's software in iTunes (It's running the latest iPhone Operating System or iOS).
4. Insert a SIM card from a new service provider into your iPhone. It doesn't has to be a SIM card from the network you wish to unlock - it can be any valid SIM card from ANY network provider (GSM SIM CARDS ONLY). Verizon & Sprint are not GSM SIM CARDS.
Inserting Sim - original iPhone
Inserting Sim - iPhone 3G & iPhone 3Gs
Inserting Sim - iPhone 4, iPhone 4s & iPhone 5
5. By inserting new SIM card, connect your iPhone to your computer and wait for iTunes to detect your phone.
6. Once it's been detected, disconnect the iPhone from your computer and wait for 20 seconds or so.
7. Reconnect your iPhone to your computer and wait for iTunes to detect it again.
8. Once your iPhone is detected for 2nd time, the process is completed and your iPhone will be unlocked. After searching for few seconds, you'll see your new carrier logo appear in the top left hand corner on the screen of your iPhone's. This unlock is permanent and you can update your iPhone's firmware at anytime.
If you wish to see the unlock screen below within iTunes to confirm this is an official unlock, simply perform a restore within iTunes and once your iPhone is restored you will be presented with the message"Congratulation's, your iPhone has been unlocked" once the restore has completed.
iPhone No Service After Factory Unlock Troubleshooting Guide
If you get No Service on iPhone after factory unlocking you can fix it here. I used info here from different forums, websites and from my own experience and notes from our clients.
There is a part of our customers who are facing No Service problem on their iPhone, especially 3GS owners with iPad Baseband or after using Ultrasn0w unlock. Also there can be on iPhone No Service after restore or update, activation or deactivation with Redsn0w or SAM tool, even after jailbreak.
The problem is not in unlocking. In other words it is better that your iPhone shows No Service than Invalid Sim card or Sim card is not supported.
If iPhone is still locked to AT&T it will never accept other Sim. If you see No Service that means that iPhone accepted the Sim and there are can be tons of other reasons but not in unlocking and here I’ll try to describe most of them.
Most Common iPhone No Service Errors and How To Fix Them
1. The easiest method, and I can confirm that it works in most cases, to reset network settings:
- Insert unsupported Sim card, open Settings on iPhone, go to General -> Reset -> Reset Network Settings.
- Also some say you can try to Erase All Content and Settings but before it do a backup and I heard that it could harm your device.
2. In Setting you will see AirPlane mode which you can also use to fix No Service on iPhone as well:
- Insert Sim card and turn on/off Airplane mode several time while it will pick the signal.
3. Also while your iPhone is on, pop the Sim card out and turn off the power. Insert Sim card and turn iPhone On. Or, turn iPhone on, pop up the Sim card, turn iPhone on and insert Sim card. It worked for many.
4. Go to Settings – General – Cellular/Network and turn on Cellular Data, Enable 3G, Data Roaming and wait for the signal. If they already on – turn it off and wait for the signal.
Note: Some say that you need just reboot iPhone holding two buttons and you will get service.
5. No Service iPhone problem can be after activating and deactivating iPhone using just app as SAMPrefs (
SAM unlock tool) or Redsn0w. In this case follow steps in method 6.
6. If methods above don’t work to fix No Service on iPhone, you can try the third method which is the best because it works in 90% cases:
1). Insert non-AT&T Sim card in iPhone and connect it to iTunes using USB.
2). When iTunes detects your device perform a backup and after backup just click Restore.
Note: First try just Restore, without holding Shift/Option. Also you can try to restore putting iPhone first into DFU mode.
3). Wait till the program finish restore and you will see two options in iTunes:
- Restore from a backup;
- Set up iPhone as a new phone.
so choose Set up as a new.
4). After installing iPhone as a new you will need to pass activation steps, so do it with non-AT&T Sim card inserted and wait for the Signal.
If nothing, read and perform methods (1,2,3,4) described above.
7. iPad baseband. There are many iPhones 3GS still running iPad baseband (06.15.00) which you or previous user installed on iPhone for
Ultrasn0w unlock. That could be the reason of No Service as well.
First check the baseband of your iPhone: Settings – General – About- Modem Firmware and if you see 06.15.00 – this is iPad baseband and you need to downgrade it. You need redsn0w tool for this. Do steps below:
- Download Redsn0w (blog.iphone-dev.org) and run it as Administrator if on Windows.
- Use Redsn0w to enter DFU mode: in redsn0w go to Extras – Just Boot and follow on screen instructions to put the device into DFU mode.
- When your device will successfully enter DFU launch iTunes and restore iPhone in iTunes.
- Enter DFU again.
- Now download the latest iOS version (getios.com).
- In redsn0w go to Extras – Select IPSW and choose the iOS file you downloaded.
- Go back to the main window of redsn0w and click Jailbreak.
- Choose Downgrade from iPad baseband and uncheck Install Cydia and click Next.
That’s it. After the process you will have service and can make calls.
8. Very often when you try to cut the Sim card yourself many do it wrong and iPhone can’t detect the Sim. You better order the Sim of the carrier you want to use on iPhone.
9. Sometimes there is really no service of the carrier you want to use in the area you are. There can be just no coverage. Or the Sim you try to use is not active anymore. In these case you need to contact the carrier.
10. Other reason of No Service on
factory unlocked iPhone is the antenna of your device. Yes, it could also be a hardware issue and your iPhone has a bad antenna and it can’t catch the signal. In this case just contact or go to the Apple Store and ask them to check it for you. If it would be antenna they would give you the new iPhone.
That’s it. All this info was found on different forums, blogs and from the own experience of our clients. Just try every of them and read every no service fix very carefully. Also you can always contact Apple care or the carrier of the Sim card you need to use.
And remember, if iPhone got No Service issue it doesn’t mean that it is not unlocked. If device would still be locked it never accept and activate iPhone with other Sim card.
- See more at: http://www.att-iphone-unlock.com/iphone-no-service-factory-unlock-troubleshooting-guide/#sthash.LAUsA677.dpu
Make sure the Iphone is updated to the current 6.1.4 or latest version for your model
Make sure ITUNES is updated to the 11.0.4 or current version.
Also try doing this process again on another computer. Sometimes this helps the issue too. Also Fly mode on/off, remove/insert SIM, plug/unplug from computer, connect/disconnect iTunes
If the phone is reported STOLEN/LOST it will not work on USA GSM. It will ONLY work overseas.
Also if the phone is NOT ACTIVATED, it will not work. You will need to activate it by using an ACTIVE AT&T USA sim card through Itunes.
The phone will not work on Sprint/Verizon/Net10
If your phone is not unlocking or getting signal, PLEASE perform the backup/restore once again (above). Sometimes it takes upto 3 times to get it provisioned and unlocked. Also another solution is also trying to do another restore on another computer. Many times this has done the trick too.
Si estas en República Dominicana puedes pagar con deposito bancario local.
Contat/Contacto
Whatsapp: +18494035472
Cel:
Orange +1809-705-6620
Claro +1849-403-5472
Email: unlocksRD@gmail.com
